Post Reply 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NEW OSC Touch Layout (November 2015)
11-02-2015, 07:40 AM
Post: #11
RE: NEW OSC Touch Layout (November 2015)
(11-01-2015 11:56 PM)jpedroc Wrote:  The limits can be set modifying the Code.

Я так понимаю, что в скетче учитывается лишь Ваш тип батареи.
В связи с этим позволю себе небольшой вопрос или пожелание.
Не планируется ли добавление к основному скетчу дополнительного конфигурационного файла, где через конструкцию #ifdef #endif можно будет определить различные типы батарей, типы схемных решений (плат) выбранных последователем и соответствующие этим типам выводы для подключения выбираемой же переферии с соответствующей многовариантной поддержкой этой периферии. Инями словами, не планируется ли условное программирование, как это сделано в прошивке Merlin для 3D принтера, например.
Если такое желание возникнет, - рад буду помочь.


I understand that the sketch is taken into account only your battery type.
In this regard, let me little questions or suggestions.
Whether it is planned to add an additional sketch to the main configuration file, which by design #ifdef #endif you can define different types of batteries, the types of circuit design (motherboard) chosen successor, and corresponding to these types of connections for the selected periphery with appropriate multivariate support this periphery. In other words, it does not plan any conventional programming, as is done in the firmware for Merlin 3D printer, for example.
If there is a desire - I will be glad to help.
Find all posts by this user
Quote this message in a reply
11-02-2015, 09:37 PM
Post: #12
RE: NEW OSC Touch Layout (November 2015)
GitHub reposiroty updated!

New version of libraries : JJROBOTS_BROBOT and JJROBOTS_OSC
New version of main code : BROBOT.ino
New version of TouchOSC layout with battery indicator
New version of 3D parts. (new BROBOT EVO version parts)

Code changes:
- New default parameters tuned for BROBOT EVO version
- Some code clean ups
And some great ideas from our users on the forums:
- Battery indicator on interface. Every 5 seconds sends the robots battery status to interface
- Support for touchMessages(/z). Controls autoreset when users lift the fingers
This is a nice example of the power of open projects! Thanks to the users that colaborate to make a better project. Specially sasa999, KomX, Wampo, Wolfram, vsr_paradise, Patrick, etc...

@KomX there is a new #define LIPOBATT that let you choose the type of battery. 0 for NiMH batteries, and 1 for Lipo Batt. This only affects the range for the Battery indicator.

Jose Julio.
Find all posts by this user
Quote this message in a reply
11-02-2015, 09:56 PM
Post: #13
RE: NEW OSC Touch Layout (November 2015)
Hi, Jose!
Quote:GitHub reposiroty updated!
Very good! One note. When working with ESP8266 noticed one unpleasant moment - after a long pause, lost the first team. The drug - in TouchOSC options include ping. And use this command to initialize the response of the level of battery charge.
Find all posts by this user
Quote this message in a reply
11-05-2015, 04:27 PM
Post: #14
RE: NEW OSC Touch Layout (November 2015)
Thank you for this! I love the new version!
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)