Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
About osc protocol
08-12-2015, 08:01 PM
Post: #1
About osc protocol
Hello
I build a B-Robot, but instead of touchosc application I tried to use the free Oscillation app from Workproaudio.
But it looks like the page format is not supported : no message received with the BROBOT.touchosc layout …
I used this solution:
- Edit with TouchOSCEditor the layout, and replace the ”/x/” by “/x-“ (x= page number) for all the controls (non auto mode naming)
- In “JJROBOTS_OSC.cpp” : in JJROBOTS_OSC_Class::MsgRead
replace if ((UDPBuffer[0] == '/')&&(UDPBuffer[2] == '/'))
by if ((UDPBuffer[0] == '-')&&(UDPBuffer[2] == '/'))

And it’s all ! if it can help someone …
Patrick
Find all posts by this user
Quote this message in a reply
09-23-2015, 12:49 PM
Post: #2
RE: About osc protocol
Hi Patrick,

Thanks for sharing your solution with the free alternative Oscillation.
I tried myself and it worked like a charm ;-)

I am building a custom version of the B-Robot myself (no 3D printed parts) and the early prototype is starting to work.
Thanks again!
Find all posts by this user
Quote this message in a reply
10-06-2015, 11:11 PM
Post: #3
RE: About osc protocol
Thank you Patrick,
If you don't mind, we will include this OSC software option in the main webpage. It is a free alternative! ;-)

Cheers
Visit this user's website Find all posts by this user
Quote this message in a reply
11-06-2015, 07:26 PM
Post: #4
RE: About osc protocol
(08-12-2015 08:01 PM)Pat78 Wrote:  Hello
I build a B-Robot, but instead of touchosc application I tried to use the free Oscillation app from Workproaudio.
But it looks like the page format is not supported : no message received with the BROBOT.touchosc layout …
I used this solution:
- Edit with TouchOSCEditor the layout, and replace the ”/x/” by “/x-“ (x= page number) for all the controls (non auto mode naming)
- In “JJROBOTS_OSC.cpp” : in JJROBOTS_OSC_Class::MsgRead
replace if ((UDPBuffer[0] == '/')&&(UDPBuffer[2] == '/'))
by if ((UDPBuffer[0] == '-')&&(UDPBuffer[2] == '/'))

And it’s all ! if it can help someone …
Patrick

Nice work !

Can you share your osc layout ?
Find all posts by this user
Quote this message in a reply
06-27-2016, 12:54 PM
Post: #5
RE: About osc protocol
Hi,

have you shared new osc?

I tried to modify touchosc as you said but doesn't work.

Are you sure the new line would be if ((UDPBuffer[0] == '-')&&(UDPBuffer[2] == '/'))

Due to new controls naming "/x-" may be it would be if ((UDPBuffer[0] == '/')&&(UDPBuffer[2] == '-'))

I'll try last one and inform you asap.

thanks in advance
Rosario
Find all posts by this user
Quote this message in a reply
06-28-2016, 04:39 AM
Post: #6
RE: About osc protocol
not work for me, I used TouchOSC, downloaded around

-----------------------------------------------------------------------------------------------------------------------

no trabajó para mi, usé TouchOSC, descargué por ahí
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)