Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
no Found Hosts with Touch-Osc
02-22-2016, 01:04 PM
Post: #1
no Found Hosts with Touch-Osc
Hello,

I have just finished my B-Robot.
But no Found Hosts with Touch-Osc.
Have you an idea for helping me ?

Here is the Serial dump:
Code:
BROBOT by JJROBOTS v2.2
Initializing I2C devices...
Initializing DMP...
Enabling DMP...
Gyro calibration!!  Dont move the robot in 10 seconds...
Initalizing ESP Wifi Module...
WIFI RESET
+++AT


OK
AT+RST


OK
0MHz
  SPI Mode       : DIO
  SPI Flash Size & Map: 8Mbit(512KB+512KB)
jump to run user1 @ 1000

ón't use rtc mem data
rl?‚slÌÿ
Ai-Thinker Technology Co.,Ltd.

ready
AT+GMR

AT version:0.40.0.0(Aug  8 2015 14:45:58)
SDK version:1.3.0
Ai-Thinker Technology Co.,Ltd.
Build:1.3.0.2 Sep 11 2015 11:48:04
OK
AT+CIPSTAMAC?

+CIPSTAMAC:"18:fe:34:d5:c5:99"

OK
MAC:18FE34D5C599

AT+CWQAP


OK
AT+CWMODE=2


OK
AT+CWSAP="JJROBOTS_99","87654321",5,3


OK
Start UDP server at port 2222
AT+CIPMUX=0


OK
AT+CIPMODE=1


OK
AT+CIPSTART="UDP","192.168.4.2",2223,2222,0

CONNECT

OK
AT+CIPSEND


OK

>
Testing device connections...
MPU6050 connection successful
Servo initialization...
Steper motors initialization...
Adjusting DMP sensor fusion gain...
BATTERY:44
Let´s start...

My Touch-OSC parameters:
Host: 192.168.4.2
Port Outgoing: 2222
Port Incoming: 2223
Find all posts by this user
Quote this message in a reply
02-23-2016, 03:26 PM
Post: #2
RE: no Found Hosts with Touch-Osc
You do no have to find a HOST in the OSCtouch, just connect your smartphone to the new WIFI network (JJROBOTS_99 in your case).
Use the default password (87654321)
Cheers!
Find all posts by this user
Quote this message in a reply
02-24-2016, 11:15 AM
Post: #3
RE: no Found Hosts with Touch-Osc
OK thank you.

I can connect to JJROBOTS_99 but I am not sure of my Host IP in TouchOSC: 192.168.4.2 or 192.168.4.1 ?
Find all posts by this user
Quote this message in a reply
03-17-2016, 03:40 AM
Post: #4
RE: no Found Hosts with Touch-Osc
I have same problem. My Android phone connected to JJROBOTS WIFI. And Robot start UDP server at IP 192.168.4.2 OK.
But TouchOSC can't find host.
Find all posts by this user
Quote this message in a reply
03-17-2016, 03:52 PM
Post: #5
RE: no Found Hosts with Touch-Osc
I had solved my problem;
1. Scan network. Find IP of Robot (192.168.4.1 with my case). Find my phone IP (192.168.4.2 in my case)
2. Start UDP with Robot IP:
- ESPsendCommand("AT+CIPSTART=\"UDP\",\"192.168.4.1\",2223,2222,0", "OK", 3);
3. Setup host on TouchOSC. 192.168.4.1
Final it work find ^^
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)