Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RN-171 (RN-XV WiFly) Setup
06-27-2015, 10:34 PM (This post was last modified: 06-27-2015 10:44 PM by --Marc.)
Post: #1
Question RN-171 (RN-XV WiFly) Setup
I already have a Sparkfun RN-XV WiFly Module ...
--> https://www.sparkfun.com/products/10822

... which is the same RN-171 chip as the JJRobot Wi-Fi Module
--> http://jjrobots.com/product/wi-fi-module/

What steps (if any) need to be done to setup and configure a RN-XV (RN-171) to work with the B-Robot?

Thanks.
Find all posts by this user
Quote this message in a reply
06-28-2015, 10:38 AM
Post: #2
RE: RN-171 (RN-XV WiFly) Setup
https://github.com/jjrobots/B-ROBOT/tree/master/Utils
Find all posts by this user
Quote this message in a reply
06-30-2015, 01:07 PM
Post: #3
RE: RN-171 (RN-XV WiFly) Setup
Brian ,
follow these steps:
1) Download the code from github for the WIFI module.
2) Program the Leonardo with this code
3) Attach the Leonardo to the B-robot BRAIN SHIELD with the WIFI module already connected
4) Turn on the Leonardo and let it "re-program" the RN-XV WIFI Module.
6) Done!

Now you will need to reprogramme the Leonardo again with the B-robot CODE, if not, the Leonardo board will keep re-programming the B-robot shield over and over as long as is attached to the B-robot shield :-)
Try and tell us.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)