Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Arduino Uno and CNC Shield V3.0
03-08-2020, 08:08 PM
Post: #1
Arduino Uno and CNC Shield V3.0
Hello

Can i use Uno and CNC Shield V3.0 and if what i need to change.
Please i have this Uno and CNC Shield V3.0 in storage.

Greetings
Find all posts by this user
Quote this message in a reply
03-09-2020, 08:32 AM
Post: #2
RE: Arduino Uno and CNC Shield V3.0
Should work, have a look here

https://github.com/plex3r/EggDuino

and don't forget to swop the inkscape extensions as mentioned in the instuctions.
Find all posts by this user
Quote this message in a reply
03-09-2020, 09:07 AM
Post: #3
RE: Arduino Uno and CNC Shield V3.0
(03-09-2020 08:32 AM)justjason Wrote:  Should work, have a look here

https://github.com/plex3r/EggDuino

and don't forget to swop the inkscape extensions as mentioned in the instuctions.

Thanks i will try today and i hope that it will work's. Thanks again
Find all posts by this user
Quote this message in a reply
03-09-2020, 12:25 PM (This post was last modified: 03-09-2020 02:11 PM by Matej1006.)
Post: #4
RE: Arduino Uno and CNC Shield V3.0
i got this error now :

Traceback (most recent call last):
File "eggbot.py", line 1406, in <module>
e.affect()
File "inkex.py", line 283, in affect
self.effect()
File "eggbot.py", line 281, in effect
self.EggbotOpenSerial()
File "eggbot.py", line 1299, in EggbotOpenSerial
self.serialPort = self.getSerialPort()
File "eggbot.py", line 1356, in getSerialPort
for strComPort in eggbot_scan.findEiBotBoards():
File "eggbot_scanwin32.py", line 6, in findEiBotBoards
hKey = _winreg.OpenKey( hReg, r"SYSTEM\CurrentControlSet\Enum\USB\VID_04D8&PID_FD92" )
WindowsError: [Error 2] The system cannot find the file specified

i delete inkscape fully and is same problem Sad
Find all posts by this user
Quote this message in a reply
03-09-2020, 06:04 PM (This post was last modified: 03-09-2020 06:20 PM by justjason.)
Post: #5
RE: Arduino Uno and CNC Shield V3.0
Are you using and original Arduino or a clone ?

This version of Inkscape from JJrobots should work with an Arduino

Inkscape Portable for Arduino
Find all posts by this user
Quote this message in a reply
03-10-2020, 07:45 AM (This post was last modified: 03-10-2020 08:39 AM by Matej1006.)
Post: #6
RE: Arduino Uno and CNC Shield V3.0
(03-09-2020 06:04 PM)justjason Wrote:  Are you using and original Arduino or a clone ?

This version of Inkscape from JJrobots should work with an Arduino

Inkscape Portable for Arduino

In my office i have original Arduino Uno at home i have Clone and it's same error.

and with that portable i get this error:

The code execution cannot proceed because libglib-2.0-0.dll was not found.

and the i copy all files too file in which I install inkscape and i get same error
Find all posts by this user
Quote this message in a reply
03-10-2020, 08:07 PM
Post: #7
RE: Arduino Uno and CNC Shield V3.0
I have not seen that issue before, have a look here if you can find something useful
http://forums.jjrobots.com/showthread.php?tid=1199
Find all posts by this user
Quote this message in a reply
03-11-2020, 07:44 AM
Post: #8
RE: Arduino Uno and CNC Shield V3.0
(03-10-2020 08:07 PM)justjason Wrote:  I have not seen that issue before, have a look here if you can find something useful
http://forums.jjrobots.com/showthread.php?tid=1199

i figurit out i have to add 10uF capacitor instead of resistor to disable autoreset

thanks for help Wink
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)