Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Stepper voltage
03-26-2015, 10:27 PM
Post: #1
Stepper voltage
You recommend the 42BYGHW609 or similar as stepper. This stepper has an operating voltage of 3.4V but the stepper driver module is supplied with 12V. Is this correct, doesn't lead this to problems?
Find all posts by this user
Quote this message in a reply
03-27-2015, 11:02 AM
Post: #2
RE: Stepper voltage
Please google "stepper motors" to read on how these steppers are working.
But in short, what's important for steppers is the current limitation. The operating voltage can be increased by a factor of up to 8 or 10 (depending on the model) and that will increase the max RPMs but the max current per phase (1 coil) has to respected to prevent overheating/destruction of the stepper. The stepper is driven by a driver ( Pololu A4988 - https://www.pololu.com/product/1182 ) . Have a look at the Current Limitation paragraph that should help you to understand. So, when you first power up your robot, you need to adjust the current on the Pololu.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)