Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Introducing the Motorized Camera SLIDER: info + Links
06-12-2019, 02:38 PM (This post was last modified: 06-12-2019 02:39 PM by JJrobots JP.)
Post: #11
RE: Introducing the Motorized Camera SLIDER: info + Links
(06-10-2019 11:45 PM)rondadon Wrote:  Hi there!

I bought a Arduino Lenoardo and the Brain Shield from your site/shop. Now I wanted to flash the Arduino COde to the Ardunio with the newest Arduino Version 1.8.9 but first when uploading I get some Warnings:



Code:
C:\Users\User\Downloads\CameraSlider_v4-1\CameraSlider_v4\CameraSlider_v4.ino: In function 'void setup()':

C:\Users\User\Downloads\CameraSlider_v4-1\CameraSlider_v4\CameraSlider_v4.ino:53:31: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]

   ESPsendCommand("AT", "OK", 1);

                               ^

C:\Users\User\Downloads\CameraSlider_v4-1\CameraSlider_v4\CameraSlider_v4.ino:54:35: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]

   ESPsendCommand("AT+RST", "OK", 2); // ESP Wifi module RESET

                                   ^

C:\Users\User\Downloads\CameraSlider_v4-1\CameraSlider_v4\CameraSlider_v4.ino:56:35: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]

   ESPsendCommand("AT+GMR", "OK", 5);

                                   ^

C:\Users\User\Downloads\CameraSlider_v4-1\CameraSlider_v4\CameraSlider_v4.ino:65:40: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]

   ESPsendCommand("AT+CWMODE=2", "OK", 3); // Soft AP mode

                                        ^

C:\Users\User\Downloads\CameraSlider_v4-1\CameraSlider_v4\CameraSlider_v4.ino:67:16: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]

   char *cmd =  "AT+CWSAP=\"JJROBOTS_XX\",\"87654321\",5,3";

                ^

C:\Users\User\Downloads\CameraSlider_v4-1\CameraSlider_v4\CameraSlider_v4.ino:75:40: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]

   ESPsendCommand("AT+CIPMUX=0", "OK", 3);  // Single connection mode

                                        ^

C:\Users\User\Downloads\CameraSlider_v4-1\CameraSlider_v4\CameraSlider_v4.ino:76:41: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]

   ESPsendCommand("AT+CIPMODE=1", "OK", 3); // Transparent mode

                                         ^

C:\Users\User\Downloads\CameraSlider_v4-1\CameraSlider_v4\CameraSlider_v4.ino:84:38: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]

   ESPsendCommand("AT+CIPSEND", ">", 2); // Start transmission (transparent mode)



Besides that it flashes to the Arduino.
Now when I power the Arduino and the Brain shield through 12V Power Supply the only thing the brainshield does is that the WiFi module blinks once, then after a second a second time, and then no more. I also can not see any broadcastet WiFi SSID from the Brain Shield.
I read that others here have the same issue and I wanted to ask what the solution to this Problem is.

I've done the following to ensure this is not a hardware related problem:
  • changed the Brainshield



Also what I have done:
  • Used Arduino Versions: 1.65 , 1.8.9
  • Flashed it from a Linux Distribution and also Windows 10


I am really trying to get this working but in the current state I (and others) are stuck.


Would be great if we could resolve this issue. If you need any further Information about this issue feel free to ask! Smile

Thank you very much.
Greetings
Ron
We have emulated the same conditions and everything when fine under Arduino IDE 1.8.9 :-\

   
First, check you have selected the RIGHT Arduino Board and selected the correct COM PORT
If you are using the ARDUINO APP for Windows, switch to the regular installer and make sure you are placing all the libraries and files which comes with the CAMERA SLIDER arduino code (zip file) inside the same folder. And close any other software which can be using the C++ compiler just in case (CURA, Repetier...)
Visit this user's website Find all posts by this user
Quote this message in a reply
06-15-2019, 11:38 AM
Post: #12
RE: Introducing the Motorized Camera SLIDER: info + Links
Hi there!

Thank you for your fast answer....

I now have tested this on 4 Windows/Linux machines and also tested it with different Arduino versions. Still the same Issue.

Would you be so kind to upload the compiled binary file so I can flash the Arduino with it and test if the BrainShield is working? Thank you very much.

Have an nice day and greetings from Germany!
Ron
Find all posts by this user
Quote this message in a reply
06-17-2019, 08:43 AM (This post was last modified: 06-17-2019 08:44 AM by JJrobots JP.)
Post: #13
RE: Introducing the Motorized Camera SLIDER: info + Links
Here you go :-)

.zip  CameraSlider_v5 binaries.zip (Size: 41.82 KB / Downloads: 8)
Visit this user's website Find all posts by this user
Quote this message in a reply
06-18-2019, 10:33 PM
Post: #14
RE: Introducing the Motorized Camera SLIDER: info + Links
Thank you very much for your help...

Will test it tomorrow Smile

Have a nice day!
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)