Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Introducing the Motorized Camera SLIDER: info + Links
06-10-2019, 11:45 PM
Post: #10
RE: Introducing the Motorized Camera SLIDER: info + Links
Hi there!

I bought a Arduino Lenoardo and the Brain Shield from your site/shop. Now I wanted to flash the Arduino COde to the Ardunio with the newest Arduino Version 1.8.9 but first when uploading I get some Warnings:



Code:
C:\Users\User\Downloads\CameraSlider_v4-1\CameraSlider_v4\CameraSlider_v4.ino: In function 'void setup()':

C:\Users\User\Downloads\CameraSlider_v4-1\CameraSlider_v4\CameraSlider_v4.ino:53:31: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]

   ESPsendCommand("AT", "OK", 1);

                               ^

C:\Users\User\Downloads\CameraSlider_v4-1\CameraSlider_v4\CameraSlider_v4.ino:54:35: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]

   ESPsendCommand("AT+RST", "OK", 2); // ESP Wifi module RESET

                                   ^

C:\Users\User\Downloads\CameraSlider_v4-1\CameraSlider_v4\CameraSlider_v4.ino:56:35: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]

   ESPsendCommand("AT+GMR", "OK", 5);

                                   ^

C:\Users\User\Downloads\CameraSlider_v4-1\CameraSlider_v4\CameraSlider_v4.ino:65:40: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]

   ESPsendCommand("AT+CWMODE=2", "OK", 3); // Soft AP mode

                                        ^

C:\Users\User\Downloads\CameraSlider_v4-1\CameraSlider_v4\CameraSlider_v4.ino:67:16: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]

   char *cmd =  "AT+CWSAP=\"JJROBOTS_XX\",\"87654321\",5,3";

                ^

C:\Users\User\Downloads\CameraSlider_v4-1\CameraSlider_v4\CameraSlider_v4.ino:75:40: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]

   ESPsendCommand("AT+CIPMUX=0", "OK", 3);  // Single connection mode

                                        ^

C:\Users\User\Downloads\CameraSlider_v4-1\CameraSlider_v4\CameraSlider_v4.ino:76:41: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]

   ESPsendCommand("AT+CIPMODE=1", "OK", 3); // Transparent mode

                                         ^

C:\Users\User\Downloads\CameraSlider_v4-1\CameraSlider_v4\CameraSlider_v4.ino:84:38: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]

   ESPsendCommand("AT+CIPSEND", ">", 2); // Start transmission (transparent mode)



Besides that it flashes to the Arduino.
Now when I power the Arduino and the Brain shield through 12V Power Supply the only thing the brainshield does is that the WiFi module blinks once, then after a second a second time, and then no more. I also can not see any broadcastet WiFi SSID from the Brain Shield.
I read that others here have the same issue and I wanted to ask what the solution to this Problem is.

I've done the following to ensure this is not a hardware related problem:
  • changed the Brainshield



Also what I have done:
  • Used Arduino Versions: 1.65 , 1.8.9
  • Flashed it from a Linux Distribution and also Windows 10


I am really trying to get this working but in the current state I (and others) are stuck.


Would be great if we could resolve this issue. If you need any further Information about this issue feel free to ask! Smile

Thank you very much.
Greetings
Ron
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Introducing the Motorized Camera SLIDER: info + Links - rondadon - 06-10-2019 11:45 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)