Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Brain shield 3 3d model?
04-23-2018, 08:09 AM
Post: #1
Brain shield 3 3d model?
Is there a Brain Shield 3 3D model? If possible in step format?

Great help when designing new projects that includes the brain shield
Find all posts by this user
Quote this message in a reply
04-23-2018, 05:07 PM
Post: #2
RE: Brain shield 3 3d model?
Hi, Sorry, we do not have any 3D model of it. But if you can get a STEP model of an Arduino you can just create a box on top of it with as the Brain shield. It is not the same but maybe can help while trying to place the electronics inside a new frame
Visit this user's website Find all posts by this user
Quote this message in a reply
04-28-2018, 01:07 PM
Post: #3
RE: Brain shield 3 3d model?
(04-23-2018 05:07 PM)JJrobots JP Wrote:  Hi, Sorry, we do not have any 3D model of it. But if you can get a STEP model of an Arduino you can just create a box on top of it with as the Brain shield. It is not the same but maybe can help while trying to place the electronics inside a new frame

OK, is it possible to get an PCB image from the top then? and dimensions?
If so, I can make a simple 3D model that I can use in my 3D modell
Find all posts by this user
Quote this message in a reply
04-28-2018, 09:12 PM (This post was last modified: 04-28-2018 09:26 PM by @mundsen.)
Post: #4
RE: Brain shield 3 3d model?
   

Did make a 3D model based on an image I found on the site.
Not perfect, but okI think

   

This is the setup I plan to test in my robot

Raspberry PI
dfrobot arduino leonardo cape
jjbrain
Find all posts by this user
Quote this message in a reply
04-30-2018, 07:06 AM
Post: #5
RE: Brain shield 3 3d model?
(04-28-2018 09:12 PM)@mundsen Wrote:  Did make a 3D model based on an image I found on the site.
Not perfect, but okI think



This is the setup I plan to test in my robot

Raspberry PI
dfrobot arduino leonardo cape
jjbrain
If anyone is interested I may share the model in step/stl format?
Find all posts by this user
Quote this message in a reply
04-30-2018, 10:05 AM (This post was last modified: 04-30-2018 10:07 AM by Vaygr.)
Post: #6
RE: Brain shield 3 3d model?
Since there is no 3D model available, it would be a cool addition to this open-source project. Shy
You could share it on https://www.thingiverse.com/
Find all posts by this user
Quote this message in a reply
04-30-2018, 10:35 AM
Post: #7
RE: Brain shield 3 3d model?
(04-30-2018 10:05 AM)Vaygr Wrote:  Since there is no 3D model available, it would be a cool addition to this open-source project. Shy
You could share it on https://www.thingiverse.com/

Ok - I`ll do that
Is there an existing jjrobots group on thingiverse?
Find all posts by this user
Quote this message in a reply
04-30-2018, 07:57 PM (This post was last modified: 05-02-2018 06:32 AM by @mundsen.)
Post: #8
RE: Brain shield 3 3d model?
I have shared the 3D model on thingiverse in step and stl format

https://www.thingiverse.com/thing:2886345

I do not know if there is a better place on this site for this URL?

The 3D model is based on a photo I fund on the site, so not 100% accurate.

I can help make a 3d model of the new "brain" if I get a sample + some quality images with correct aspect ratio.

   
Find all posts by this user
Quote this message in a reply
05-01-2018, 09:32 AM
Post: #9
RE: Brain shield 3 3d model?
Thanks for this! As we are about to release the new Brain shield, we will upload here all the info we have as soon as we have the final version of the layout ;-)

Good 3D job mundsen!
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)