Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Lipo Battery Connectors: What Type Are They?
07-05-2019, 05:44 PM
Post: #1
Lipo Battery Connectors: What Type Are They?
Hello all,

I am starting a school research project on blimps and I ordered a 3.7V 300mAh LiPO battery with a JST connector. I found that this doesn't fit the Blimpduino 2's male connector. I have looked at numerous sources but couldn't find the one that matches the Blimpduino's battery connectors. Does anyone know what type of connectors they are, or where to look?

Thanks
Find all posts by this user
Quote this message in a reply
07-08-2019, 12:04 PM (This post was last modified: 07-08-2019 12:04 PM by JJrobots JP.)
Post: #2
RE: Lipo Battery Connectors: What Type Are They?
(07-05-2019 05:44 PM)atouhidi Wrote:  Hello all,

I am starting a school research project on blimps and I ordered a 3.7V 300mAh LiPO battery with a JST connector. I found that this doesn't fit the Blimpduino 2's male connector. I have looked at numerous sources but couldn't find the one that matches the Blimpduino's battery connectors. Does anyone know what type of connectors they are, or where to look?

Thanks

They are the standard connector for small Drone´s batteries (1 cell):
You can find them here: https://es.banggood.com/DIY-1_25mm-2-Pin...rehouse=CN

The connector goes under different names: X5 X5C JJRC H5C FY310 FY310B F180 Male (or 2 Pin Micro Jst 1.25 Cable 51005)
Visit this user's website Find all posts by this user
Quote this message in a reply
07-08-2019, 09:51 PM
Post: #3
RE: Lipo Battery Connectors: What Type Are They?
(07-08-2019 12:04 PM)JJrobots JP Wrote:  
(07-05-2019 05:44 PM)atouhidi Wrote:  Hello all,

I am starting a school research project on blimps and I ordered a 3.7V 300mAh LiPO battery with a JST connector. I found that this doesn't fit the Blimpduino 2's male connector. I have looked at numerous sources but couldn't find the one that matches the Blimpduino's battery connectors. Does anyone know what type of connectors they are, or where to look?

Thanks

They are the standard connector for small Drone´s batteries (1 cell):
You can find them here: https://es.banggood.com/DIY-1_25mm-2-Pin...rehouse=CN

The connector goes under different names: X5 X5C JJRC H5C FY310 FY310B F180 Male (or 2 Pin Micro Jst 1.25 Cable 51005)

Thanks for the post. It is clear on the website you provided what names refer to this connector. However, I found connectors on amazon without any of those names mentioned:

https://www.amazon.com/gp/product/B01MXE...UTF8&psc=1

I also found 1S LiPO batteries with what I believe are the connectors compatible with the Blimpduino 2:

https://www.amazon.com/gp/product/B071KK...UTF8&psc=1


Hope this helps beginner level engineers like myself.

Thanks again
Find all posts by this user
Quote this message in a reply
07-09-2019, 09:24 PM
Post: #4
RE: Lipo Battery Connectors: What Type Are They?
(07-08-2019 09:51 PM)atouhidi Wrote:  
(07-08-2019 12:04 PM)JJrobots JP Wrote:  
(07-05-2019 05:44 PM)atouhidi Wrote:  Hello all,

I am starting a school research project on blimps and I ordered a 3.7V 300mAh LiPO battery with a JST connector. I found that this doesn't fit the Blimpduino 2's male connector. I have looked at numerous sources but couldn't find the one that matches the Blimpduino's battery connectors. Does anyone know what type of connectors they are, or where to look?

Thanks

They are the standard connector for small Drone´s batteries (1 cell):
You can find them here: https://es.banggood.com/DIY-1_25mm-2-Pin...rehouse=CN

The connector goes under different names: X5 X5C JJRC H5C FY310 FY310B F180 Male (or 2 Pin Micro Jst 1.25 Cable 51005)

Thanks for the post. It is clear on the website you provided what names refer to this connector. However, I found connectors on amazon without any of those names mentioned:

https://www.amazon.com/gp/product/B01MXE...UTF8&psc=1

I also found 1S LiPO batteries with what I believe are the connectors compatible with the Blimpduino 2:

https://www.amazon.com/gp/product/B071KK...UTF8&psc=1


Hope this helps beginner level engineers like myself.

Thanks again

Yes, those Amazon´s batteries look fine for the blimpduino (maybe a little bit short of charge -just 250mAh-) and those connectors are the same :-)
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: