Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Flashing light
10-26-2017, 12:47 PM
Post: #4
RE: Flashing light
The thing is:
First, you have to connect your computer to the iboardbot and configure the WIFI parameters so the iboardbot will know the name and password of your WIFI network. After that, the iboardbot will restart itself and connect to the WIFI network with the parameters provided by you.
At this point, you will not see the "JJrobots_ibb" network anymore. From here, the iboardbot will be connected to your WIFI network. If the parameters provided are not correct, the iboardbot will not connect and a complet re-boot is mandatory.
To do that:
Disconnect your router and turn on your iboardbot. It will try to connect to the WIFI network 3 times for a minute. After not finding it, it will come back to the "factory status" and will create again the "JJrobots_ibb" network. Now it would be time to start again introducing the right connection parameters.

Keep in mind that you can get to the CONFIGURATION PAGE on the iboardbot doing this:
1) Connect to the "JJrobots_ibb" network using this password: 87654321
2) Open your browser and go to: 192.168.4.1
You will see two fields you will have to populate with your WIFI name and password.
More info here:
http://ibbapp.jjrobots.com/wizard/helpconfig.html
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Flashing light - Hollie - 04-05-2017, 03:53 AM
RE: Flashing light - JJrobots JP - 04-05-2017, 09:33 AM
RE: Flashing light - Carlos Tchiang - 10-23-2017, 11:24 AM
RE: Flashing light - JJrobots JP - 10-26-2017 12:47 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)