JJRobots COMMUNITY
B-Bot O-Rings? - Printable Version

+- JJRobots COMMUNITY (http://forums.jjrobots.com)
+-- Forum: JJrobots (/forumdisplay.php?fid=1)
+--- Forum: B-Robot (/forumdisplay.php?fid=2)
+--- Thread: B-Bot O-Rings? (/showthread.php?tid=881)



B-Bot O-Rings? - ftherrmann - 06-23-2016 03:54 AM

Does the Bbot $124 version (electronics only, no plastic) come with the rubber o-rings for the wheels?


RE: B-Bot O-Rings? - JJrobots JP - 06-23-2016 03:25 PM

Hi!
Yes, It is sometimes a hassle to get them so we have included the O-rings with the KIT ;-)


RE: B-Bot O-Rings? - jmansor - 01-18-2017 08:40 AM

(06-23-2016 03:25 PM)jpedroc Wrote:  Hi!
Yes, It is sometimes a hassle to get them so we have included the O-rings with the KIT ;-)

Hi jpedroc

The 3d print wheel has rim diam of 90mm and recessed of 88.7mm.
What is the size of the O ring?


RE: B-Bot O-Rings? - JJrobots JP - 01-23-2017 10:37 AM

the O-ring diameter is (aprox) 280m (if that was the info you were looking for)


RE: B-Bot O-Rings? - jmansor - 02-02-2017 06:37 AM

(01-23-2017 10:37 AM)jpedroc Wrote:  the O-ring diameter is (aprox) 280m (if that was the info you were looking for)

Did you mean diam of 80mm? It cannot be in meters right.Wink

Reason i'm asking, i'm going to order the o-ring but not sure whats diam should I order.


RE: B-Bot O-Rings? - JJrobots JP - 02-02-2017 10:40 AM

(02-02-2017 06:37 AM)jmansor Wrote:  
(01-23-2017 10:37 AM)jpedroc Wrote:  the O-ring diameter is (aprox) 280m (if that was the info you were looking for)

Did you mean diam of 80mm? It cannot be in meters right.Wink

Reason i'm asking, i'm going to order the o-ring but not sure whats diam should I order.
Wops! I meant PERIMETER! 280mm perimeter


RE: B-Bot O-Rings? - JesperJuul - 03-15-2017 01:54 PM

If you have a 3dprinter and some flexfilament I made this(see the attaches STL file), and it works great on mine.



RE: B-Bot O-Rings? - JJrobots JP - 03-15-2017 05:21 PM

Thanks!
Would you mind if we add it to the Thingiverse repository so everyone (with flexfilament) can print it? Of course, we will name you as a contributor ;-)


RE: B-Bot O-Rings? - JesperJuul - 03-15-2017 10:31 PM

(03-15-2017 05:21 PM)jpedroc Wrote:  Thanks!
Would you mind if we add it to the Thingiverse repository so everyone (with flexfilament) can print it? Of course, we will name you as a contributor ;-)

Of course you can. I would be happy if you shared it with the community.