JJRobots COMMUNITY
avrdude: verification error; content mismatch - Printable Version

+- JJRobots COMMUNITY (http://forums.jjrobots.com)
+-- Forum: JJrobots (/forumdisplay.php?fid=1)
+--- Forum: iBoardbot (/forumdisplay.php?fid=33)
+---- Forum: Technical subforum (/forumdisplay.php?fid=34)
+---- Thread: avrdude: verification error; content mismatch (/showthread.php?tid=2006)



avrdude: verification error; content mismatch - PEKI - 06-06-2019 06:18 AM

I have STEM. Uploading code ends with this result. Tested on 2 comps. Pls help


RE: avrdude: verification error; content mismatch - JJrobots JP - 06-07-2019 12:46 PM

(06-06-2019 06:18 AM)PEKI Wrote:  I have STEM. Uploading code ends with this result. Tested on 2 comps. Pls help

Hi,
What do you mean by STEM?
Did you tried with the recommended Arduino IDE package? Are you selecting the right Arduino Board and COM port?


RE: avrdude: verification error; content mismatch - PEKI - 06-07-2019 05:59 PM

STEM KIT. Downloaded last IDE 1.8.9. Compilation OK, uploading with this error. Yes, selected Leonardo and COM port where Leonardo was recognized connected.


RE: avrdude: verification error; content mismatch - JJrobots JP - 06-10-2019 05:26 PM

(06-07-2019 05:59 PM)PEKI Wrote:  STEM KIT. Downloaded last IDE 1.8.9. Compilation OK, uploading with this error. Yes, selected Leonardo and COM port where Leonardo was recognized connected.

Could you upload a screecapture of the Arduino IDE when displaying that error?


RE: avrdude: verification error; content mismatch - PEKI - 06-11-2019 10:29 PM

(06-10-2019 05:26 PM)JJrobots JP Wrote:  
(06-07-2019 05:59 PM)PEKI Wrote:  STEM KIT. Downloaded last IDE 1.8.9. Compilation OK, uploading with this error. Yes, selected Leonardo and COM port where Leonardo was recognized connected.

Could you upload a screecapture of the Arduino IDE when displaying that error?



RE: avrdude: verification error; content mismatch - JJrobots JP - 06-12-2019 01:35 PM

Are you placing all the files inside the same folder? You need to extract everything to the same folder. And double check there is no other software running at the same time you are uploading the code which uses C++ (like CURA)


RE: avrdude: verification error; content mismatch - PEKI - 06-20-2019 06:39 AM

I will check. I understand you have not fast solution for me. I will play with it a little - connect another arduino, upload another program. Sorry for my communication leg, I am busy.