JJRobots COMMUNITY
Were to BUY or Fill /re-fill your balloon - Printable Version

+- JJRobots COMMUNITY (http://forums.jjrobots.com)
+-- Forum: JJrobots (/forumdisplay.php?fid=1)
+--- Forum: Blimpduino (/forumdisplay.php?fid=42)
+--- Thread: Were to BUY or Fill /re-fill your balloon (/showthread.php?tid=1797)



Were to BUY or Fill /re-fill your balloon - JJrobots JP - 09-21-2018 10:49 AM

This is a list of stores / groceries where you can buy a foil balloon and fill it up with Helium. We will update this list with your contributions :-)

FILL/ REFILL:
http://stores.partycity.com/
https://www.dollartree.com/
https://www.dollartree.com/
https://www.zurchers.com/
https://www.balloontime.com/where-to-buy/

Where to GET a FOIL BALLOON:
https://www.walmart.com/c/kp/foil-balloons
https://www.dollartree.com/
https://intl.target.com/p/balloon-time-helium-tank/-/A-13567277#lnk=sametab
http://www.partycity.com/
https://www.zurchers.com/
https://www.balloontime.com/where-to-buy/


RE: Were to BUY or Fill /re-fill your balloon - Sander - 09-22-2018 06:37 AM

And where to get the Blimpduino itself?


RE: Were to BUY or Fill /re-fill your balloon - JJrobots JP - 09-25-2018 11:37 AM

(09-22-2018 06:37 AM)Sander Wrote:  And where to get the Blimpduino itself?

We have released (still not widely available) the development kit. It is a 100% working blimpduino but open to suggestions from everyone: https://www.jjrobots.com/product/blimpduino2-0/


RE: Were to BUY or Fill /re-fill your balloon - painless - 10-03-2018 12:18 PM

Dears,

i like to print the stl-files. The link on thingiverse is not working.
Can you help ?

best regards

Kai


RE: Were to BUY or Fill /re-fill your balloon - JJrobots JP - 10-03-2018 10:13 PM

(10-03-2018 12:18 PM)painless Wrote:  Dears,

i like to print the stl-files. The link on thingiverse is not working.
Can you help ?

best regards

Kai
Here is the Gondola V10. [attachment=356]

Print it will 0.8mm wall thickness and 10% infill. PLA will work nicely