JJRobots COMMUNITY
How about a bigger table? - Printable Version

+- JJRobots COMMUNITY (http://forums.jjrobots.com)
+-- Forum: JJrobots (/forumdisplay.php?fid=1)
+--- Forum: Air- hockey Robot EVO (/forumdisplay.php?fid=4)
+--- Thread: How about a bigger table? (/showthread.php?tid=1150)



How about a bigger table? - mikea - 12-30-2016 02:04 AM

I already have an air hockey table and want to use it for this kit, or adapt this kit to it with longer rails. Will the stock kit work with a table with outside dimensions of 38x74" and a play area of 32 1/2 x 68 1/2"? It's a Brunswick brand Model 51-202000-2. If the stock kit is not fully compatible, might you be able to suggest where to source longer linear rods, etc that would be compatible with your other kit parts so we can use it anyway?

Thanks,
Mike


RE: How about a bigger table? - JJrobots JP - 12-30-2016 01:36 PM

Well. Everything could be adjusted but for those dimensions the motors should be changed for more powerful ones (and the linear rods should be changed too...) There would be some work to do.


RE: How about a bigger table? - roachslayer - 04-01-2017 09:02 PM

(12-30-2016 01:36 PM)jpedroc Wrote:  Well. Everything could be adjusted but for those dimensions the motors should be changed for more powerful ones (and the linear rods should be changed too...) There would be some work to do.

Right, but would it need code changes?


RE: How about a bigger table? - JoseJulio - 04-04-2017 04:09 PM

Yes, you will need to adjust some parameters on the Arduino code.
On the APP side, we are working on a new version of the app that could let the user adjust the table size (actual version of the app works only on the default table size)

Jose.

(04-01-2017 09:02 PM)roachslayer Wrote:  
(12-30-2016 01:36 PM)jpedroc Wrote:  Well. Everything could be adjusted but for those dimensions the motors should be changed for more powerful ones (and the linear rods should be changed too...) There would be some work to do.

Right, but would it need code changes?