JJRobots COMMUNITY
Brain shield break out pins - Printable Version

+- JJRobots COMMUNITY (http://forums.jjrobots.com)
+-- Forum: JJrobots (/forumdisplay.php?fid=1)
+--- Forum: B-Robot (/forumdisplay.php?fid=2)
+--- Thread: Brain shield break out pins (/showthread.php?tid=1059)



Brain shield break out pins - jimmy - 07-21-2016 09:38 PM

I want to connect two led to the brain shield, anyone know how I can do that? The brain shield has not break out pins.

Thanks,


RE: Brain shield break out pins - JohnQ - 07-22-2016 01:36 PM

Why not using one Servo output? what is the minimum voltage for the leds? the servo outpus is easy to control and "almost" straightforward. Here is some info:
https://oscarliang.com/turn-off-led-rc-transmitter-quadcopter-radio/
http://www.instructables.com/id/Convert-a-Servo-to-switch-on-and-off-LEDs/?ALLSTEPS


RE: Brain shield break out pins - jimmy - 07-22-2016 03:43 PM

@JohnQ, Thanks for the links good info. there! What I am trying to do is to add some lights to the bot. There are unused pins on Leonardo but can't use them. want to add a couple blinking led's.