JJRobots COMMUNITY

Full Version: Can’t connect to iboardbot
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hi,
Can anyone tell me how to obtain the Regkey?
I’m stuck at this page!: open attachment!.

If is also so difficult to get to that page too, I had retried so many times in many times in order to get there!!
(06-21-2020 07:51 AM)a64664137 Wrote: [ -> ]Hi,
Can anyone tell me how to obtain the Regkey?
I’m stuck at this page!: open attachment!.

If is also so difficult to get to that page too, I had retried so many times in many times in order to get there!!
Did you get the iboardbot KIT? or just the DEVIA board? The KIT comes with the REGKEY, otherwise you will have to get it separately
(06-21-2020 10:58 AM)JohnQ Wrote: [ -> ]
(06-21-2020 07:51 AM)a64664137 Wrote: [ -> ]Hi,
Can anyone tell me how to obtain the Regkey?
I’m stuck at this page!: open attachment!.

If is also so difficult to get to that page too, I had retried so many times in many times in order to get there!!
Did you get the iboardbot KIT? or just the DEVIA board? The KIT comes with the REGKEY, otherwise you will have to get it separately

Received an email from JJRobot, found my RegKey, Thanks!
Now I have entered to the Web app page shown below:

[Image: su23qejze4w9udz6g.jpg]

For testing, I entered "Hi" in the TEXT and click "Draw" then Send, no movement at all. The stepper motor shaft is loose when I turn it, means is not energized. The yellow LED is blinking + Solid Green Light:

[Image: haz4gi8va5caepr6g.jpg]
Which arduino code are you using? You have the old Brain shield + Arduino. You will need this code instead the one for the DEVIA

[attachment=510]
(06-23-2020 01:45 PM)JJrobots JP Wrote: [ -> ]Which arduino code are you using? You have the old Brain shield + Arduino. You will need this code instead the one for the DEVIA

Let me ask this 1st, when I purchased the Iboardbot does the Arduino have the code installed already or not?, I haven't change any code since purchase.
(06-23-2020 02:00 PM)a64664137 Wrote: [ -> ]
(06-23-2020 01:45 PM)JJrobots JP Wrote: [ -> ]Which arduino code are you using? You have the old Brain shield + Arduino. You will need this code instead the one for the DEVIA

Let me ask this 1st, when I purchased the Iboardbot does the Arduino have the code installed already or not?, I haven't change any code since purchase.

Well. It depends on the KIT you got and the date. When did you order it? Did you get the Plug and Play version or the KIT?
Anyway, programming it is not hard at all. Let me know if you have any problem in the process ;-)
The purchase date was July 8 2018, price 241.14 US.
Will upload the code and see what happens.

I uploaded iBoardBot_108.ino to the Arduino Leonardo, and the problem still there!, the stepper motor aren't locked, is loose...
Reference URL's