JJRobots COMMUNITY

Full Version: CAMERA SLIDER rail version
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3
We are developing a new version of the CAMERA SLIDER.
Basically, the hardware changes, but the electronics, motors, cables ... almost 70% of the ancillary elements are the same.
So, if you have created the original CAMERA slider, it will be easy to create this one.

We have moved to smoother STEPPER MOTOR DRIVERS (Stepstick TMC2208) too. We will post everything as soon as we test everything 200%.

The control APP will be the same.
Hi,

Great idea!!! Looking forward Wink
Any ETA?
[Image: V6UltaB.png]

[Image: RtFKWip.gif]


This minimalist master piece overcame my expectations! Good job. I Lov it and i am definitely going to transform my old one. 3D parts repository? Thank you. Cant wait Smile
Thanks! We are still working with the assembly guide but this 3D model can help you during the set-up process: https://p3d.in/MLhGP
I have attached the Arduino CODE and STL files to this message :-)
[attachment=452]
[attachment=453]

We strongly recommend using the TMC2208 motor drivers, but you will need to reduce the current output a little (to 0.7A) Info about how to do that: https://youtu.be/7VHwcEroHPk?t=254
The control APP is the same (we have updated it days ago)
Thanks a lot. I am printing already. Any BOM? What size are the bearings? bolts? TMC2208 are super silent and i use them since my first build Wink
Is there a chance that you could provide simple example of the sketch for Blynk? It would be awesome to create my own control panel app to be able setup start/end points for distance/angle, speed, acceleration, loop, auto-home(with end-stop), manual mode and so on... I manged to control LEDs on your board... and that's it for now Big Grin
You can check the BOM here [attachment=455]
We are taking a look to your "blnk" proposal Oki. Good idea
Heart
Great! I wanted to do something similar and needed to adapt the top. Now I have 85% of the work done because of you.
My v-slot profile is 20x40 that I had left at home.

[Image: d1171fee51e0baa88f36dca31645a02fo.jpg]
(02-12-2020 05:27 PM)adrik22 Wrote: [ -> ]Heart
Great! I wanted to do something similar and needed to adapt the top. Now I have 85% of the work done because of you.
My v-slot profile is 20x40 that I had left at home.

[Image: d1171fee51e0baa88f36dca31645a02fo.jpg]
You are more than welcome :-)
If you can use similar electronics or replicate the DEVIA control board, you will be able to control it using the Control APP:
Android: https://play.google.com/store/apps/detai...ider&hl=en
And iOs: https://apps.apple.com/es/app/cameraslider/id1418868442
How can Devia work away from home? I only see AC option. I think I remembered that before they sold 18650 battery adapters, isn't it possible now?

any coupon to buy Devia controller?
Of course it can.
We recommend you a 12V or 9V battery holder with the regular 5.5mm connector, like this one:
https://www.amazon.com/5-5x2-1mm-Connect...742&sr=8-6

Or if you are planning to connect it to your car battery, use this one: https://www.amazon.com/12V-24V-Charger-P...252&sr=8-1

We will add a battery holder to the KIT asap. Would you like to get one from us (a 9V, 6xAA batteries)?
Pages: 1 2 3
Reference URL's