JJRobots COMMUNITY

Full Version: Brain shield 3 3d model?
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Is there a Brain Shield 3 3D model? If possible in step format?

Great help when designing new projects that includes the brain shield
Hi, Sorry, we do not have any 3D model of it. But if you can get a STEP model of an Arduino you can just create a box on top of it with as the Brain shield. It is not the same but maybe can help while trying to place the electronics inside a new frame
(04-23-2018 05:07 PM)JJrobots JP Wrote: [ -> ]Hi, Sorry, we do not have any 3D model of it. But if you can get a STEP model of an Arduino you can just create a box on top of it with as the Brain shield. It is not the same but maybe can help while trying to place the electronics inside a new frame

OK, is it possible to get an PCB image from the top then? and dimensions?
If so, I can make a simple 3D model that I can use in my 3D modell
[attachment=295]

Did make a 3D model based on an image I found on the site.
Not perfect, but okI think

[attachment=296]

This is the setup I plan to test in my robot

Raspberry PI
dfrobot arduino leonardo cape
jjbrain
(04-28-2018 09:12 PM)@mundsen Wrote: [ -> ]Did make a 3D model based on an image I found on the site.
Not perfect, but okI think



This is the setup I plan to test in my robot

Raspberry PI
dfrobot arduino leonardo cape
jjbrain
If anyone is interested I may share the model in step/stl format?
Since there is no 3D model available, it would be a cool addition to this open-source project. Shy
You could share it on https://www.thingiverse.com/
(04-30-2018 10:05 AM)Vaygr Wrote: [ -> ]Since there is no 3D model available, it would be a cool addition to this open-source project. Shy
You could share it on https://www.thingiverse.com/

Ok - I`ll do that
Is there an existing jjrobots group on thingiverse?
I have shared the 3D model on thingiverse in step and stl format

https://www.thingiverse.com/thing:2886345

I do not know if there is a better place on this site for this URL?

The 3D model is based on a photo I fund on the site, so not 100% accurate.

I can help make a 3d model of the new "brain" if I get a sample + some quality images with correct aspect ratio.

[attachment=297]
Thanks for this! As we are about to release the new Brain shield, we will upload here all the info we have as soon as we have the final version of the layout ;-)

Good 3D job mundsen!
Reference URL's