JJRobots COMMUNITY

Full Version: TouchOSC file for B_Robot
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
I have TouchOSC on my iphone. Where can I find the control file for B-Robot to download to OSC?
Take a look to this version, it is quite useful. http://forums.jjrobots.com/thread-1384.html

Info about the OSCTouch version here (layout and others): https://www.jjrobots.com/b-robot-evo-kit...tructions/
(10-08-2017 04:29 PM)JohnQ Wrote: [ -> ]Take a look to this version, it is quite useful. http://forums.jjrobots.com/thread-1384.html

Info about the OSCTouch version here (layout and others): pprobablyhttps://www.jjrobots.com/b-robot-evo-kit-assembly-instructions/

Thanks.. I now have TouchOSC on my iphone and have the put BROBOTxy screen on the app. However, I can't seem to get the robot to respond to the TouchOSC app.
It still works with Roverbot app. I am missing something here regarding making the connection between TouchOSC and B-Robot. It's probably obvious but I don't see it.
Thanks for any help.
(10-08-2017 09:59 PM)JohnQ Wrote: [ -> ]Did you set the OSCTouch communication parameters as indicated in the Assembly guide?: https://www.jjrobots.com/b-robot-evo-kit...tructions/

https://www.jjrobots.com/wp-content/uplo...1-46v2.png
https://www.jjrobots.com/wp-content/uplo...meters.png

Got those set. Now Servo button works but I get no action when moving the xy curser.
Hi!
I just added a page with the setting-up steps here: https://www.jjrobots.com/osctouch-app-configuration/
(10-08-2017 11:07 PM)stantoo Wrote: [ -> ]
(10-08-2017 09:59 PM)JohnQ Wrote: [ -> ]Did you set the OSCTouch communication parameters as indicated in the Assembly guide?: https://www.jjrobots.com/b-robot-evo-kit...tructions/

https://www.jjrobots.com/wp-content/uplo...1-46v2.png
https://www.jjrobots.com/wp-content/uplo...meters.png

Got those set. Now Servo button works but I get no action when moving the xy curser.
If the servo works that means there is communication between the Iphone- Brobot. good! If you have problems with the X-Y layout (looks like you will need to modify the B-robot CODE as indicated here by Cliff: http://forums.jjrobots.com/thread-1384.html) you can try with the standard LAYOUT: http://www.jjrobots.com/wp-content/uploa...-CHECK.rar
(10-08-2017 04:29 PM)JohnQ Wrote: [ -> ]Take a look to this version, it is quite useful. http://forums.jjrobots.com/thread-1384.html

Info about the OSCTouch version here (layout and others): https://www.jjrobots.com/b-robot-evo-kit...tructions/

I am still having a problem with this and need a little more specific guidance. When I follow the link to the assy instructions and click on the link to the file I need, I get a .rar file which I can't see how to get into the TouchOSC editor. The brobotxy file was a .touchosc file which was no problem for me to use in the editor and link to my iphone.
Any help would be appreciated.
Stan
(10-12-2017 08:41 PM)stantoo Wrote: [ -> ]
(10-08-2017 04:29 PM)JohnQ Wrote: [ -> ]Take a look to this version, it is quite useful. http://forums.jjrobots.com/thread-1384.html

Info about the OSCTouch version here (layout and others): https://www.jjrobots.com/b-robot-evo-kit...tructions/

I am still having a problem with this and need a little more specific guidance. When I follow the link to the assy instructions and click on the link to the file I need, I get a .rar file which I can't see how to get into the TouchOSC editor. The brobotxy file was a .touchosc file which was no problem for me to use in the editor and link to my iphone.
Any help would be appreciated.
Stan

Did you install the new OSCxy.ini file as instructed in the previous post?
The xy control only works with the changed OSCxy program.

If you wanted the original BROBOT layout unzip the attached file and use the TouchOSC editor to put it on your phone.
Reference URL's