JJRobots COMMUNITY

Full Version: B Robot EVO 2 Kit Arduino Code
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
I know the code is already on the Arduino when you buy the B Robot EVO 2 kit, but do they give you the code somewhere so you can modify? I know you can't upload from the Arduino to PC.
(10-01-2017 03:53 PM)Paulywog Wrote: [ -> ]I know the code is already on the Arduino when you buy the B Robot EVO 2 kit, but do they give you the code somewhere so you can modify? I know you can't upload from the Arduino to PC.

Try this link https://github.com/jjrobots/B-ROBOT_EVO2

Also this link has the install instructions https://www.jjrobots.com/b-robot-evo-2-assembly-guide/

Have a great day
Hello
very cool app respect.
I tried to make a model but there were some problems
1. When the platform is tilted, the engine is stuck
2. no how to send PID settings from smartphone no CALL button
3. In the Arduino display shows after MPU 6050 Error: -11 is ok
I have some advice and help
Piotr
(10-02-2017 06:11 AM)PTomczyk13 Wrote: [ -> ]Hello
very cool app respect.
I tried to make a model but there were some problems
1. When the platform is tilted, the engine is stuck
2. no how to send PID settings from smartphone no CALL button
3. In the Arduino display shows after MPU 6050 Error: -11 is ok
I have some advice and help
Piotr
Have you tried to check the MPU connection? Looks like it is not sending the correct values (or values at all)
Reference URL's